Composite materials are the way of the future.

N.V.H. (Noise, Vibration and Harshness)
Acceleration
Comfort

With the combination of Carbonarts's LITE IS RIGHT DNA design philosophy and Carbonart's patented design ingenuity we bring you control beyond your wildest expectations.

Carbonart melds advanced aerospace composites with the finest non ferrous materials metallurgy can supply. Carbonart brings you a masterstroke in automotive engineering not seen outside the hallowed institution of Formula One Racing Teams.

                         

See end of page for list of Authorised Resellers.

 

BA - FG 6 Cylinder Engine Coil Cover

 

Part suits all FG 6 cylinder models ute and sedan. The finish on these items is as good on the back as it is on the front. Perfect in everyway.

 

   

Key Benefits

• Carbon composite materials are ten times stronger than steel and five times lighter.
• Warranty against manufacturing defects.
• Carbon is immune to corrosion.
• Made in Australia.

Pricing

 

Driveshafts and Halfshafts

BPT can now offer you a solution from Carbon Art to your driveline needs that will far exceed any amount of horsepower your street driven or dedicated competition car could make.  

No matter the make no matter the model,
Front wheel drive
Rear wheel drive
All wheel drive we have a solution.   

• Huge reduction in driveline N.V.H. (Noise, Vibration, Harshness)
• Less rotational mass significantly increases responsiveness.
• Less shock loading passing to the Transmission and Differential
• Critical speed limitations of the steel or aluminium shafts are all but eliminated.
• Increased safety of carbon composite it will not shrapnel like metal shafts.
• Carbon composite shafts will never twist and due to its elastic memory properties, the shaft ends will not set in a out of phase position.
• Up to 5% increase in rear wheel horsepower due to a combination of carbon composite, better power transmission and less rotational mass characteristics.
• Markedly better fuel consumption figures increasing range.

These shafts by them selves may not make your car a Dynometer Queen but on the road or on the track, the rotational mass reduction makes Carbonart's half shafts and driveshaft tellingly the best and most reliable horsepower investment you could possibly make. 

Key Benefits

• Carbon composite materials are ten times stronger than steel and five times lighter.
• 3 year warranty against manufacturing defects.
• Carbon is immune to corrosion.
• Made in Australia.

Pricing

 

Carbon Composite Plenum Chamber Boss R

   

With the success of the Boss R® Aluminium Intake plenum we decided to take it up a level. Introducing the new technologies of Carbon Composite with proven design and further flow testing it was possible to make gains from streamlining our current design.

A great new feature from the Carbon Composite version of the Boss R® are the heat isolation properties and the ability for us to free form in areas needed to make better flow.

It is important to note that this Plenum comes as an assembly including fuel rails that support 1050hp, Twin 60mm throttle body and a revised lower intake manifold that is turned 180deg from factory "this was necessary to take advantage of air flow designs".

   

The table below depicts comparison between standard and 80mm throttle bodies compared to the twin bore throttle body as used on the Boss R® Carbon intake plenum.

Key Benefits

• Carbon composite materials are ten times stronger than steel and five times lighter.
• Heat Isolation from lower to upper plenum.
• Fits all 5.4L Lower Boss manifolds
• 3 year warranty against manufacturing defects.
• Carbon is immune to corrosion.
• Made in Australia.

Pricing

*1 Exchange lower manifold required for this pricing, Assembly includes fuel rails, regulator housing and throttle body.

*2 No Manufacture Warranty provided on self installation, Plenum chamber Only.

 

Falcon Ute 4 Bar rear Suspension

 

Introducing the ultimate in rear suspension stability systems for the Falcon Utility as used on Australia's fastest Falcon Coyote Ute. This 4 bar Carbon Composite setup and Pan hard system offers precision handling and control for any driving condition.

 

Easy adjustments are allowable for different application ranging from road to track and drag, Coil over shock combinations are available from third party purchase or can be arranged through purchase from BPT.

 

       

Key Benefits

• Carbon composite materials are ten times stronger than steel and five times lighter.
• Improved Response and Handling.
• 5 year warranty against manufacturing defects.
• Carbon is immune to corrosion.
• Made in Australia.

Pricing

*1 Does not Include Coil Over Shock Assemblies.

*2 This Assembly not compatible with 4 Link system.

 

Coyote 5.0L Ignition Coil Covers

 

 

      

 

Key Benefits

• Carbon composite materials are ten times stronger than steel and five times lighter.
• Warranty against manufacturing defects.
• Carbon is immune to corrosion.
• Made in Australia.

Pricing

 

FG Upper Radiator Shroud

 

 

Key Benefits

• Carbon composite materials are ten times stronger than steel and five times lighter.
• Warranty against manufacturing defects.
• Carbon is immune to corrosion.
• Made in Australia.

Pricing

Description	BPT Part Number	Price
FG Falcon Upper Radiator Shroud		$999.00

 

FG Gear Lever Surround Bezel

 

 

 

 

Key Benefits

• Carbon composite materials are ten times stronger than steel and five times lighter.
• Warranty against manufacturing defects.
• Carbon is immune to corrosion.
• Made in Australia.

Pricing

 

BA-FG Composite Power Steer Drip Tray

Key Benefits

• Carbon composite materials are ten times stronger than steel and five times lighter.
• Warranty against manufacturing defects.
• Carbon is immune to corrosion.
• Made in Australia.

Pricing

 

FG Tri Pod Gauge Holder

 

Carbonart FG 3XG Gauge Holder 52mm.

 

Part suits all FG models ute and sedan. The finish on these items is as good on the back as it is on the front. Perfect in everyway. Perfect for 3 52 mm gauges of any brand. With extra rear clearance and factory type connection barbs this has an OEM type fitment. Ergonomically angled and engineered to suit drivers between 5'8 and 6'2 with the median eye line aligned to the gauge dash position.

 

Key Benefits

• Carbon composite materials are ten times stronger than steel and five times lighter.
• Warranty against manufacturing defects.
• Carbon is immune to corrosion.
• Made in Australia.

Pricing

 

AUTHORISED CARBONART RESELLERS

BPT and Carbonart have appointed Authorised Resellers and installers of the Carbonart product in a territory near you. To ensure customer quality assurance and genuine product we suggest only using an Authorized Carbonart Reseller.

Authorised Resellers:

PERTH        BPT Motorsport ph: (08) 9302 3415

QLD.           Elite Automotive ph: (07) 3274 2445

N.S.W.        Carbon Motorsports ph: 0417442754

VIC.            COMING SOON